transparent

We develop chemical and mineral products

View Delamin's range of chemical and mineral products for a wide range of industrial applications.

APPLICATIONS A – F

Acoustic Absorption Profiles

acoustic profiles aAutomotive sound proofing decreases or eliminates the effects of exterior noise, primarily engine, exhaust and tyre noise.

The introduction of lightweight inert functional fillers such as Cenospheres into bitumen profiles has enabled the development of efficient acoustic absorbing profiles. Profile thickness is reduced.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Anti-Condensation Paints

anti condensation paintsAnti-condensation paints have the effect of warming walls so that droplets of moisture do not multiply to condensation. High build insulating additives such as Cenopsheres are ideal for this purpose.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Automotive Cables

automative cablesNew levels of safety are now required for the highly regulated automotive, railway, marine and military industries.

Brominated additives have faced attention in the flame retardant cables sector. The EU has banned several types of PBDEs (polybrominated diphenyl ethers) and this substances have gradually being phased out. This change has seen the emergence of new zero halogen nitrogen flame retardants.

Delamin supplies Delflam™ for this application.

Car Body Fillers

car body fillersCar body fillers are predominantly lightweight, two-component polyester systems. Cenospheres are used in these systems as a light weight filler. Cenosphers enhance filling properties and contribute to easy sanding characteristics.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Ceramic Tile Adhesives

ceramic tile adhesivesPorcelain (ceramic) tiles are a heavy tile requiring specialised adhesive cement for installation. Additives such as Cenospheres impart important characteristics to the adhesives. Incorporation of Cenospheres reduces weight, increases workability and is chemically resistant.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Concrete Repair Mortars

concrete repair mortarsThere are many mortar repair systems. These vary from modified polymers, epoxy and cementitious systems. Cenospheres are a compatible additive in all types of repair mortars. Essential properties are weight reduction. This allows thicker profiling on verticle substraits without 'slumping'. The free-flowing characteristics of Cenospheres coupled with chemical and weather resistance also contribute to the performance of repair mortars.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Dental Investments

dental InvestmentsInvestment castings are used for the fabrication of crowns in dental laboratories. Critical aspects such as working time, shrinkage and reproducability require tightly controlled materials. Magnesium Oxide powder is an intrinsic part of high quality investment powders.

Delamin supplies Delamag™ Dental for this application.

Drilling

drilling1

Oil well drill bits require alloys that are wear resistant, fatigue resistant and corrosion resistant.

The Delamin QPQ® process together with range of the Delamin Nitriding products help to achieve this.

Engineering Polymers

engineering polymersEngineering polymers have exceptional mechanical properties that make them useful in structural products. These include electronic, mechanical, and automotive components. These polymers have high compounding temperatures. When incorporating additives such as zero halogen flame retardants into compounds with engineering polymers, thermal stability is necessary.

Delamin supplies Delflam™ for this application.

Fire & Blast Boards

fire and blast boardsFire and blast boards offer protection against fire and blast impact. In extreme and hazardous conditions such as off-shore rigs, lightweighedness and corrosion resistance are invaluable properties together with non-combustable components.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Floor Levelling Compounds

floor levelling compounds1Floor levellling compounds are designed to raise and self-level uneven floor surfaces.The free flowing nature and chemical resistance of Cenospheres are ideal in this puposes.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Foundry Coatings

foundry coatings2

Foundry coatings are designed primarily to withstand high temperatures. Low thermal conductivity is essential for greater thermal efficiency. The introduction of cenospheres will reduce weight whilst maintaining the integrity of the coating.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

FR Coatings

FR coatingsFlame Retardant coatings (FR coatings) delay combustion. They are designed to protect steel, wood and other building materials. Passive fire protection is provided by including non-combustible materials such as Cenospheres in high build coatings and Nitrogen Flame Retardants for intumescent solutions.

Delamin supplies Delaspeheres™ (Cenospheres) and Delflam™ for this application.

FR Compounds

FR compoundsHalogen Free Flame Retardant compounds (HFFR), Low Smoke Zero Halogen (LSOH) and Low Smoke Fume (LSF) are terms used to identify a group of flame retardant plastic compounds.

Following the banning of several PBDEs (polybrominated diphenyl ethers), the use of these compounds is increasing in cable, flooring and foam applications. Melamine derived nitrogen flame retadants are used in these compounds.

Delamin supplies Delflam™ for this application.

APPLICATIONS H – Z

Insulating Refractory Brick

insulating refractory brickRefractory bricks are built primarily to withstand high temperatures. Low thermal conductivity is essential for greater thermal efficiency.

The introduction of Cenospheres will reduce weight whilst maintaining the integrity of the brick.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Insulating Refractory Castables

insulating refractory castablesInsulating refractory castables are made from lightweight alumina rich cements. Cenospheres are the ideal ingredient in these castable cements.

Delamin supplies Delaspeheres™ (Cenospheres) for this application.

Intumescent Coatings

intumescent coatingIntumescent coatings swell when exposed to heat thus, increasing volume and decreasing density. These coating are typically used in passive fire protection. Nitrogen flame retardant solutions are part of the intumescent mechanism.

Delamin supplies Delaspheres™ (Cenospheres) and Delflam™ for this application.

Mastic & Sealants

mastic and sealantMastics and sealants are durable flexible protecive sealants, adhering to most substrates in many different environments. They are chemically resistant and flexible.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Metal Improvements

metal improvementsMetal improvements increases wear resistance, corrosion resistance and fatigue resistance.

The Delamin QPQ® process together with range of Delamin Nitriding Bath products helps to achieve this. 

Non-Slip Paint

non slip paintNon-Slip (anti-slip) paints are high-build floor coatings. These coatings have good abrasion and chemical resistance enabling their use in many industrial and civic environments.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Oil Well Cements

oil well cementOil well cements are used in the drilling stage of oil wells. Low density slurries and cements are utilised where long columns in weak formations are required.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Plaster Board Joining Compounds

plasterboard joining compoundsPlaster board jointing compounds (dry wall compounds) are similar to plaster but are specifically designed to join dry wall plaster boards together when in situ.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

PVC Membranes

PVC membraneMembrane roofings and tanking are mostly used in commercial applications but are becoming increasingly common in residential applications. PVC membrane gain their advantage from 'lap' seams. Abrasion and chemically resistant additives such as Cenospheres are ideal for reducing weight in these membrane types.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Textured Paint

textured paintTextured paints are designed to protect exterior walls from damp penetration. The high-build nature of these paints require chemically resistant lightweight additives. Cenospheres offer ideal properties for this purpose.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

 

UPR Pultrusion

UPR pultrusionContinuous extrusion profiles are commonly used in applications such a UPV window frames. The addition of Cenospheres is beneficial for weight reduction and also imparts important weather resistant properties.

Delamin supplies Delaspheres™ (Cenospheres) for this application.

Zero Halogen NFRs

fire retardant nitrateNitrogen Flame Retardants (NFR) are a group of compounds which are becoming the focus of interest due to their environmentally friendly nature. Predominantly melamine derived, these NFRs offer low toxicity with the absence of dioxin and halogen acids. Low smoke evolution is another positive characteristic. These additives are highly efficient when compared to the lower activity of metal oxide flame retardants. Therefore, low addition levels are required resulting in these nitorgen flame retardants having less impact on the mechnical properties of the compound.

Delamin supplies Delflam™ for this application.

ISO REGISTERED

ISO firm

ENVIRONMENTALLY FRIENDLY

earth

PRODUCT ENGINEERING

chemical and minerals frontpage

GLOBAL DISTRIBUTION NETWORK

global distribution

CONTACT US

contact delamin

transparent